HONGDUI SC-14 Pince de fixation de surface de bureau pour le travail du bois
Taxes inclues Frais d'envoi calculés au paiement
Stop letting your workpieces slip mid-cut. HONGDUI's SC-14 sets the workshop standard for dead-accurate, rock-solid surface clamping. Precision-machined for 20mm bench dog setups, every component is engineered for zero-tolerance stability. Whether you are executing aggressive hand planing or high-vibration routing, the SC-14 delivers an absolute, flex-free grip—ensuring your wood stays exactly where you want it, period.
Fixation à levier à came rapide : Utilise un levier à came actionné sur le côté pour fournir une pression instantanée, permettant des changements rapides de pièces à travailler et des flux de travail efficaces.
Conception basse : Conçu pour être exceptionnellement bas sur l'établi. Cela permet d'effectuer des tâches de surface sans obstruction telles que le ponçage, le fraisage ou le rabotage au-dessus du serre-joint.
Compatibilité avec les trous de chien universels : Conçu pour s'adapter aux trous de chien standard de 20 mm (courants dans les systèmes MFT). Il peut également être adapté pour des trous de 19 mm (3/4") selon la configuration spécifique du poteau.
Application de pression horizontale : Contrairement aux serre-joints verticaux traditionnels, le SC-14 applique une pression latérale, coinçant la pièce à travailler de manière sécurisée contre un butoir ou un autre serre-joint.
Plage de serrage réglable : Le mécanisme coulissant permet d'ajuster la position du serre-joint pour s'adapter à différentes largeurs de pièces à travailler et à des formes irrégulières.
Contact non marquant : La face de serrage est conçue pour répartir la pression uniformément, garantissant une prise ferme sans enfoncer ou endommager les bords de votre bois.
Rotation à 360 degrés : Une fois inséré dans un trou de chien, le serre-joint peut tourner librement pour appliquer une pression sous n'importe quel angle, ce qui le rend idéal pour des pièces à travailler courbes ou complexes.
- Model: SC-14
- Dimension: Approximately 170mm x 115mm x 35mm
- Material: High-grade 6061 Aluminum Alloy and Stainless Steel Hardware
- Weight: Roughly 0.45kg
- Compatibility: Standard 19mm and 20mm Bench Dog Holes
1 * Desktop Surface Fixing Clamp Body, 1 * Low-Profile Clamping Arm, 1 * Adjustment Key
WARNING! This product can expose you to chemicals, including chromium, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
FAQ
Check out the most common questions our customers asked.
What is the main purpose of the SC-14 Fixing Clamp?
The SC-14 is a "pistol-grip" style quick clamp specifically engineered for woodworking workstations. Its primary role is to secure workpieces to a table or to lock guide rails (like those from Festool, Makita) into place for precise cutting and routing.
Which T-tracks is the SC-14 compatible with?
The clamp is designed to fit standard 12mm x 8mm T-track slots found on the underside of most professional guide rails. It also fits standard 19mm (3/4 Inch) T-tracks commonly used in homemade workbench tops and drill press fences.
Can I use these with an MFT (20mm hole) table?
Yes. While the clamp has a T-bolt head, it is frequently used in conjunction with 20mm bench dogs or specialized MFT adapters. It can be inserted from underneath the table through a 20mm hole to pull a workpiece tight against the table surface.
What is the maximum clamping capacity?
The SC-14 typically offers a clamping range of up to 160mm to 200mm (approx. 6–8 inches) depending on the specific rail length. This makes it ideal for everything from thin veneers to thick 8/4 hardwood slabs.
How does the "Quick-Release" mechanism work?
The SC-14 utilizes a trigger-action lever. You can slide the clamping jaw freely along the rail to close the gap quickly, then pump the trigger to apply final pressure. A dedicated release button allows the jaw to slide open instantly with one hand.
What is the clamping force of the SC-14?
Despite its lightweight feel, the mechanical ratcheting system can generate approximately 60kg to 100kg (130–220 lbs) of pressure. This is optimized for holding workpieces steady without the risk of crushing delicate wood fibers.
Are the clamping pads non-marring?
Yes. The SC-14 comes with removable soft plastic/rubber pads on both the fixed and moving jaws. These ensure that high clamping pressure does not leave indentations or "bruises" on finished wood surfaces.
What material is the clamp made of?
The main bar is made of hardened alloy steel to prevent bending under pressure, while the handle and trigger assembly are made of high-impact reinforced nylon and aluminum for a lightweight, ergonomic grip.
How do I maintain the ratcheting mechanism?
Keep the steel bar clean of resin, glue, and sawdust. If the trigger starts to slip, wipe the bar with a bit of denatured alcohol to remove oils. Avoid using heavy grease on the bar; a dry PTFE spray can be used on the internal trigger pivot if it becomes stiff.
Why is the clamp slipping on the bar?
This is usually caused by sawdust or wood pitch (resin) buildup on the steel bar. Clean the bar thoroughly. The ratcheting mechanism relies on friction against the bar; if the bar is too "polished" or oily, the teeth cannot grip.
Can I reverse the jaws to use it as a spreader?
Unlike some generic quick-clamps, the SC-14 is primarily designed for clamping. While some versions allow for the head to be moved to the opposite end, its main engineering focus is as a "pull-down" or "fixing" clamp for guide rails and tables.