HONGDUI DJ11S Pialla a Smusso per la Lavorazione del Legno
12 Testine di taglio: Smussatura innovativa HONGDUI: 3 inserti in metallo duro (4 lati ciascuno: 2 ad angolo retto + 2 ad arco), per ridurre la frequenza di sostituzione delle testine. Include 2 inserti preinstallati, 1 di ricambio e uno slot di archiviazione integrato.
Smussatura efficiente 2 in 1: L'esclusivo design della lama integrata a 4 lati consente una facile commutazione; gestisce contemporaneamente smussature diritte a 45° e smussature arrotondate, dimezzando i tempi di lavoro.
Regolazione precisa a doppia scala: Grande manopola "+-" per un facile controllo della profondità; presenta scale in mm e pollici, senza problemi di conversione delle unità, garantisce tagli precisi ogni volta.
Smussatura specializzata: Ideale per smussature diritte a 45 gradi e smussature arrotondate R3 (1/8 di pollice), perfetta per hobbisti e professionisti.
Comodi extra: Viene fornito con 2 viti di ricambio, montate sulla parte superiore destra del corpo principale, per evitare interruzioni del lavoro dovute a parti mancanti.
Notice for California Residents (Proposition 65)
Notice for California Residents (Proposition 65)
WARNING! This product can expose you to chemicals, including chromium, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
About DJ11S
The Perfect Bevel: DJ11S Dual-Shaft Chamfer Plane
The HONGDUI DJ11S is a definitive edge-profiling solution for woodworkers who refuse to compromise on surface geometry. Engineered with a sophisticated dual-shaft micro-adjustment mechanism, this plane ensures that your chamfers and bevels are perfectly uniform every time. The DJ11S provides the rigid foundation and enduring sharpness needed for flawless grain transition. Whether you are softening a crisp edge or executing repeatable geometric detailing, the HD-DJ11S delivers a fluid, precise bevel with professional-grade efficiency.
DJ11S
Approximately 15.5 x 6.5 x 4.5cm
Aluminum Alloy.
Roughly 0.65kg
Supports precise edge beveling and chamfer depths from 0.1mm to 6mm
1 * Dual-Shaft Chamfer Plane, 2 * Pre-installed Carbide Blades, 1 * Torx Wrench
FAQ
Check out the most common questions our customers asked.
What is the primary purpose of the DJ11S Chamfer Plane?
Unlike a standard block plane, the DJ11S is specifically designed to create uniform chamfers (flat bevels) or rounded edges on the corners of your workpiece. Its V-shaped base ensures the tool remains perfectly centered on the edge, eliminating the guesswork of holding a plane at a 45-degree angle.
What materials are used in its construction?
The body is made from thickened aluminum alloy, providing a balance of durability and lightness for one-handed operation. The blades are crafted from tungsten steel (carbide) or high-carbon steel, designed to hold an edge much longer than standard utility blades.
Does it have a built-in level?
Yes, the DJ11S features an integrated horizontal bubble level. This helps you ensure that the tool is held perfectly flat during operation, which is especially useful when working on larger surfaces or ensuring consistency across multiple edges.
How many different blade profiles are available?
One of the key features of the DJ11S is its modularity. It typically supports multiple interchangeable cutters:
Flat Blade: For standard 45° chamfers.
Radius Blades: Available in various sizes (e.g., R1, R2, R3) for creating different rounded edge profiles.
Specialty Blades: Depending on the kit, it may include double-rounded or pointed profiles for decorative joinery.
How do I change the blades?
The blades are secured with a single hex bolt. To change them, simply loosen the bolt with the included wrench, slide out the current blade, and drop in the new profile. The tool is designed so that the blades seat in a fixed position, requiring minimal recalibration after a swap.
How do I adjust the depth of the cut?
The DJ11S features a knurled adjustment knob at the top. Rotating the knob moves the blade assembly up or down. Because the blade is held at a fixed angle, this adjustment directly controls the width of the chamfer or the depth of the radius.
What is the maximum cutting depth?
The depth is typically adjustable from 0mm to 10mm, though for the smoothest results in hardwoods, it is recommended to take several shallow passes rather than one deep cut.
How do I ensure the chamfer is the same size on all four edges of a board?
Once you achieve the desired depth on your first edge, the locking mechanism keeps the blade at that exact height. As long as the knob isn't moved, the V-guide ensures every subsequent edge will be identical.
Can the blades be sharpened?
Tungsten steel blades are extremely hard and difficult to sharpen by hand. However, because they are modular, they are designed to be replaceable. When a blade becomes dull or nicked, most users find it more efficient to replace it with a fresh cutter to maintain precision.
How do I keep the tool sliding smoothly?
Keep the V-groove base clean of pitch and resin buildup. Periodically wipe the base with a bit of denatured alcohol. Applying a light coat of paste wax to the aluminum base will significantly reduce friction and prevent the aluminum from leaving marks on light-colored woods.
What should I do if the adjustment knob feels stiff?
Sawdust can sometimes enter the threaded adjustment column. Use a blast of compressed air to clear the mechanism. Avoid using heavy grease; a dry PTFE spray is the best choice for lubricating the internal threads without attracting more dust.